Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 18" + 18"
Check price on Amazon1970–1992 Chevrolet Camaro Wiper Blade Sizes
Your wiper sizes
Driver
18in
450 mm
Passenger
18in
450 mm
Side Pin (3/16") connector
Every Chevrolet Camaro from 1970 to 1992 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Chevrolet Camaro
Shop the 18" + 18" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1970–1992 Chevrolet Camaro
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 18" + 18"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 18" + 18"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Beam blade
Bosch ICON
Beam blade
TRICO Ice
Conventional blade
Rain-X Weatherbeater
No photo yet
Type not stated
PIAA Super Silicone
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Compare these blades
All comparisons-
vsNo photo yet
Bosch ICON vs PIAA Super Silicone
14 owner posts name both
-
vs
Bosch ICON vs Rain-X Weatherbeater
8 owner posts name both
-
vs
Bosch ICON vs TRICO Ice
4 owner posts name both
-
vs
Bosch ICON vs Rain-X Latitude
48 owner posts name both
-
vs
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
-
vs
Bosch ICON vs Bosch FOCUS
16 owner posts name both
Where the 1970–1992 Chevrolet Camaro sits
Wiper sizes for every Chevrolet Camaro range in our data.
2023–2024
- Driver
- 22"
- Passenger
- 20"
- Driver
- 21"
- Passenger
- 20"
- Driver
- 22"
- Passenger
- 20"
- Driver
- 21"
- Passenger
- 20"
- Driver
- 22"
- Passenger
- 20"
- Driver
- 24"
- Passenger
- 21"
- Driver
- 24"
- Passenger
- 24"
- Driver
- 24"
- Passenger
- 24"
- Driver
- 24"
- Passenger
- 24"
- Rear
- 18"
1970–1992
- Driver
- 18"
- Passenger
- 18"
| Year | Driver | Passenger | Rear | Arm | Page |
|---|---|---|---|---|---|
| 1993 | — Not in our data | — Not in our data | 18" | Side Pin (3/16") | |
| 1992 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1991 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1990 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1989 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1988 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1987 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1986 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1985 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1984 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1983 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1982 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1981 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1980 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1979 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1978 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1977 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1976 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1975 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1974 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1973 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1972 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1971 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
| 1970 | 18" | 18" | — None listed | Side Pin (3/16") | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 18".
About this data
Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1970–1992 Chevrolet Camaro wiper FAQ
Quick answers about this car.
What size wipers fit a 1970–1992 Chevrolet Camaro?
The 1970–1992 Chevrolet Camaro takes 18" driver-side and 18" passenger-side wiper blades. The arm uses a Side Pin (3/16") connector.
Do all 1970–1992 Chevrolet Camaro model years use the same wipers?
Yes. Every Chevrolet Camaro from 1970 to 1992 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.
What connector does the Chevrolet Camaro wiper arm use?
Side Pin (3/16"). Most replacement blades include an adapter for it, so check the adapter chart in the package.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.