WiperFinder

1964–1974 Chevrolet G10 Van Wiper Blade Sizes

Model years 1964 to 1974 Sizes from one source so far

Your wiper sizes

Driver 16in 400 mm
Passenger 16in 400 mm
J-Hook (9×3 mm) connector

Every Chevrolet G10 Van from 1964 to 1974 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Chevrolet G10 Van

Shop the 16" + 16" pair on Amazon
Driver 16" only Passenger 16" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1964–1974 Chevrolet G10 Van

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 16" + 16"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 16" + 16"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 16" + 16"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Model years covered

YearDriverPassengerArm
1974 16" 16" J-Hook (9×3 mm) This page
1973 16" 16" J-Hook (9×3 mm) This page
1972 16" 16" J-Hook (9×3 mm) This page
1971 16" 16" J-Hook (9×3 mm) This page
1970 16" 16" J-Hook (9×3 mm) This page
1969 16" 16" J-Hook (9×3 mm) This page
1968 16" 16" J-Hook (9×3 mm) This page
1967 16" 16" J-Hook (9×3 mm) This page
1966 16" 16" J-Hook (9×3 mm) This page
1965 16" 16" J-Hook (9×3 mm) This page
1964 16" 16" J-Hook (9×3 mm) This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 16".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

1964–1974 Chevrolet G10 Van wiper FAQ

Quick answers about this car.

What size wipers fit a 1964–1974 Chevrolet G10 Van?

The 1964–1974 Chevrolet G10 Van takes 16" driver-side and 16" passenger-side wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 1964–1974 Chevrolet G10 Van model years use the same wipers?

Yes. Every Chevrolet G10 Van from 1964 to 1974 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Chevrolet G10 Van wiper arm use?

J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes