Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 16" + 16"
Check price on AmazonEvery Chevrolet R20 Suburban from 1987 to 1988 takes these sizes. Any year in this range uses the same wiper blades.
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Three blade types, each in your sizes.
In your sizes: 16" + 16"
Check price on AmazonIn your sizes: 16" + 16"
Check price on AmazonIn your sizes: 16" + 16"
Check price on AmazonEach button opens that blade in your length.
Beam blade
Beam blade
Conventional blade
Type not stated
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Bosch ICON vs Rain-X Weatherbeater
8 owner posts name both
Bosch ICON vs TRICO Ice
4 owner posts name both
Bosch ICON vs Rain-X Latitude
48 owner posts name both
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
Bosch ICON vs Bosch FOCUS
16 owner posts name both
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1988 | 16" | 16" | Side Pin (3/16") | This page |
| 1987 | 16" | 16" | Side Pin (3/16") | This page |
Measure the rubber strip from end to end. It should match 16".
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
Quick answers about this car.
The 1987–1988 Chevrolet R20 Suburban takes 16" driver-side and 16" passenger-side wiper blades. The arm uses a Side Pin (3/16") connector.
Yes. Every Chevrolet R20 Suburban from 1987 to 1988 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.
Side Pin (3/16"). Most replacement blades include an adapter for it, so check the adapter chart in the package.
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.