Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 11" + 11"
Check price on Amazon1946–1949 Chrysler Royal Series Wiper Blade Sizes
Your wiper sizes
Driver
11in
280 mm
Passenger
11in
280 mm
Every Chrysler Royal Series from 1946 to 1949 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Chrysler Royal Series
Shop the 11" + 11" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1946–1949 Chrysler Royal Series
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 11" + 11"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 11" + 11"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Conventional blade
Bosch MicroEdge
Conventional blade
ANCO 31-Series
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Model years covered
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1949 | 11" | 11" | — Not in our data | This page |
| 1948 | 11" | 11" | — Not in our data | This page |
| 1947 | 11" | 11" | — Not in our data | This page |
| 1946 | 11" | 11" | — Not in our data | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 11".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1946–1949 Chrysler Royal Series wiper FAQ
Quick answers about this car.
What size wipers fit a 1946–1949 Chrysler Royal Series?
The 1946–1949 Chrysler Royal Series takes 11" driver-side and 11" passenger-side wiper blades.
Do all 1946–1949 Chrysler Royal Series model years use the same wipers?
Yes. Every Chrysler Royal Series from 1946 to 1949 shares the same blade lengths. If a blade fits one of these years, it fits them all.
What connector does the Chrysler Royal Series wiper arm use?
We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.