WiperFinder

2000 Chrysler Voyager Wiper Blade Sizes

Model year 2000 Sizes confirmed by 2 sources

Your wiper sizes

Driver 28in 700 mm
Passenger 28in 700 mm
Rear 18in 450 mm
Arm type not confirmed

These sizes are for the 2000 Chrysler Voyager.

Blades for your Chrysler Voyager

Shop the 28" + 28" pair on Amazon

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 2000 Chrysler Voyager

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 28" + 28"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 28" + 28"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 28" + 28"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Where the 2000 Chrysler Voyager sits

Wiper sizes for every Chrysler Voyager range in our data.

Wiper blade sizes by model year for the Chrysler Voyager, around 2000
YearDriverPassengerRearArmPage
2003 28" 28" 16" J-Hook (9×4 mm) / Not confirmed
2002 28" 28" 16" J-Hook (9×4 mm) / Not confirmed
2001 28" 28" 16" J-Hook (9×4 mm) / Not confirmed
2000 28" 28" 18" J-Hook (9×4 mm) / Not confirmed This page
1999 28" 28" 18" — Not in our data
1998 28" 28" 18" — Not in our data
1997 28" 28" 18" — Not in our data
1996 28" 28" 18" — Not in our data

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 28".

About this data

Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.

How to fit your new blades

We haven't confirmed the arm type for this car yet, so we don't give fitting steps. The adapter chart inside the blade's box shows which adapter to use.

2000 Chrysler Voyager wiper FAQ

Quick answers about this car.

What size wipers fit a 2000 Chrysler Voyager?

The 2000 Chrysler Voyager takes 28" driver-side, 28" passenger-side and 18" rear wiper blades. The arm uses a J-Hook (9×4 mm) connector.

What connector does the Chrysler Voyager wiper arm use?

We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes