Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 10" + 10"
Check price on Amazon1956–1962 Jeep 6-226 Wiper Blade Sizes
Your wiper sizes
Driver
10in
250 mm
Passenger
10in
250 mm
Every Jeep 6-226 from 1956 to 1962 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Jeep 6-226
Shop the 10" + 10" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1956–1962 Jeep 6-226
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 10" + 10"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 10" + 10"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Conventional blade
Bosch MicroEdge
Conventional blade
ANCO 31-Series
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Where the 1956–1962 Jeep 6-226 sits
Wiper sizes for every Jeep 6-226 range in our data.
1963–1964
- Driver
- 15"
- Passenger
- 15"
1956–1962
- Driver
- 10"
- Passenger
- 10"
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1964 | 15" | 15" | — Not in our data | |
| 1963 | 15" | 15" | — Not in our data | |
| 1962 | 10" | 10" | — Not in our data | This page |
| 1961 | 10" | 10" | — Not in our data | This page |
| 1960 | 10" | 10" | — Not in our data | This page |
| 1959 | 10" | 10" | — Not in our data | This page |
| 1958 | 10" | 10" | — Not in our data | This page |
| 1957 | 10" | 10" | — Not in our data | This page |
| 1956 | 10" | 10" | — Not in our data | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 10".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1956–1962 Jeep 6-226 wiper FAQ
Quick answers about this car.
What size wipers fit a 1956–1962 Jeep 6-226?
The 1956–1962 Jeep 6-226 takes 10" driver-side and 10" passenger-side wiper blades.
Do all 1956–1962 Jeep 6-226 model years use the same wipers?
Yes. Every Jeep 6-226 from 1956 to 1962 shares the same blade lengths. If a blade fits one of these years, it fits them all.
What connector does the Jeep 6-226 wiper arm use?
We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.