Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 16" + 16"
Check price on Amazon1978–1988 Jeep J10 Wiper Blade Sizes
Your wiper sizes
Driver
16in
400 mm
Passenger
16in
400 mm
Side Pin (3/16") connector
Every Jeep J10 from 1978 to 1988 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Jeep J10
Shop the 16" + 16" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1978–1988 Jeep J10
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 16" + 16"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 16" + 16"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Beam blade
Bosch ICON
Beam blade
TRICO Ice
Conventional blade
Rain-X Weatherbeater
No photo yet
Type not stated
PIAA Super Silicone
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Compare these blades
All comparisons-
vsNo photo yet
Bosch ICON vs PIAA Super Silicone
14 owner posts name both
-
vs
Bosch ICON vs Rain-X Weatherbeater
8 owner posts name both
-
vs
Bosch ICON vs TRICO Ice
4 owner posts name both
-
vs
Bosch ICON vs Rain-X Latitude
48 owner posts name both
-
vs
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
-
vs
Bosch ICON vs Bosch FOCUS
16 owner posts name both
Model years covered
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1988 | 16" | 16" | Side Pin (3/16") | This page |
| 1987 | 16" | 16" | Side Pin (3/16") | This page |
| 1986 | 16" | 16" | Side Pin (3/16") | This page |
| 1985 | 16" | 16" | Side Pin (3/16") | This page |
| 1984 | 16" | 16" | Side Pin (3/16") | This page |
| 1983 | 16" | 16" | Side Pin (3/16") | This page |
| 1982 | 16" | 16" | Side Pin (3/16") | This page |
| 1981 | 16" | 16" | Side Pin (3/16") | This page |
| 1980 | 16" | 16" | Side Pin (3/16") | This page |
| 1979 | 16" | 16" | Side Pin (3/16") | This page |
| 1978 | 16" | 16" | Side Pin (3/16") | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 16".
About this data
Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1978–1988 Jeep J10 wiper FAQ
Quick answers about this car.
What size wipers fit a 1978–1988 Jeep J10?
The 1978–1988 Jeep J10 takes 16" driver-side and 16" passenger-side wiper blades. The arm uses a Side Pin (3/16") connector.
Do all 1978–1988 Jeep J10 model years use the same wipers?
Yes. Every Jeep J10 from 1978 to 1988 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.
What connector does the Jeep J10 wiper arm use?
Side Pin (3/16"). Most replacement blades include an adapter for it, so check the adapter chart in the package.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.