1997–1999 Jeep Wrangler Wiper Blade Sizes
Your wiper sizes
Every Jeep Wrangler from 1997 to 1999 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Jeep Wrangler
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Where the 1997–1999 Jeep Wrangler sits
Wiper sizes for every Jeep Wrangler range in our data.
- Driver
- 16"
- Passenger
- 16"
- Rear
- 12"
- Driver
- 16"
- Passenger
- 16"
- Rear
- 12"
- Driver
- 16"
- Passenger
- 16"
- Rear
- 12"
- Driver
- 16"
- Passenger
- 16"
- Driver
- 16"
- Passenger
- 16"
- Driver
- 15"
- Passenger
- 15"
- Driver
- 15"
- Passenger
- 15"
- Rear
- 12"
- Driver
- 15"
- Passenger
- 15"
- Driver
- 14"
- Passenger
- 14"
- Rear
- 18"
- Rear
- 16"
| Year | Driver | Passenger | Rear | Arm | Page |
|---|---|---|---|---|---|
| 2006 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2005 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2004 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2003 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2002 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2001 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 2000 | 14" | 14" | — None listed | J-Hook (9×3 mm) | |
| 1999 | — Not in our data | — Not in our data | 18" | J-Hook (9×3 mm) | This page |
| 1998 | — Not in our data | — Not in our data | 18" | J-Hook (9×3 mm) | This page |
| 1997 | — Not in our data | — Not in our data | 18" | J-Hook (9×3 mm) | This page |
| 1995 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1994 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1993 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1992 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1991 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1990 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1989 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") | |
| 1988 | — Not in our data | — Not in our data | 16" | Side Pin (3/16") |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match .
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Lift the arm
Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.
Release the old blade
Press the tab where the blade connects to the hook, then slide the blade down and off the arm.
Clip on the new blade
Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.
Lower the arm and test
Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.
1997–1999 Jeep Wrangler wiper FAQ
Quick answers about this car.
What size wipers fit a 1997–1999 Jeep Wrangler?
Our data for the 1997–1999 Jeep Wrangler lists 18" rear only. Front sizes not in our data. The arm uses a J-Hook (9×3 mm) connector.
Do all 1997–1999 Jeep Wrangler model years use the same wipers?
Yes. Every Jeep Wrangler from 1997 to 1999 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.
What connector does the Jeep Wrangler wiper arm use?
J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.