Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 20" + 18"
Check price on Amazon1991–1993 Mercury Tracer Wiper Blade Sizes
Your wiper sizes
Driver
20in
500 mm
Passenger
18in
450 mm
Side Pin (1/4") connector
Every Mercury Tracer from 1991 to 1993 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Mercury Tracer
Shop the 20" + 18" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1991–1993 Mercury Tracer
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 20" + 18"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 20" + 18"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Conventional blade
Rain-X Weatherbeater
No photo yet
Type not stated
PIAA Super Silicone
Beam blade
TRICO NeoForm
Conventional blade
Bosch MicroEdge
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Compare these blades
All comparisons-
vs
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
-
vsNo photo yet
Bosch ICON vs PIAA Super Silicone
14 owner posts name both
-
vs
Bosch MicroEdge vs Bosch Excel+
14 owner posts name both
-
No photo yetvs
PIAA Super Silicone vs PIAA Si-Tech Flat
13 owner posts name both
-
vs
Bosch ICON vs TRICO NeoForm
13 owner posts name both
-
vs
Rain-X Latitude vs Rain-X Weatherbeater
11 owner posts name both
Where the 1991–1993 Mercury Tracer sits
Wiper sizes for every Mercury Tracer range in our data.
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1999 | 20" | 18" | J-Hook (9×3 mm) | |
| 1998 | 20" | 18" | J-Hook (9×3 mm) | |
| 1997 | 20" | 18" | J-Hook (9×3 mm) | |
| 1996 | 20" | 18" | J-Hook (9×3 mm) | |
| 1995 | 20" | 18" | J-Hook (9×3 mm) | |
| 1994 | 20" | 18" | J-Hook (9×3 mm) | |
| 1993 | 20" | 18" | Side Pin (1/4") | This page |
| 1992 | 20" | 18" | Side Pin (1/4") | This page |
| 1991 | 20" | 18" | Side Pin (1/4") | This page |
| 1989 | 18" | 18" | Side Pin (3/16") | |
| 1988 | 18" | 18" | Side Pin (3/16") |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 20" + 18".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1991–1993 Mercury Tracer wiper FAQ
Quick answers about this car.
What size wipers fit a 1991–1993 Mercury Tracer?
The 1991–1993 Mercury Tracer takes 20" driver-side and 18" passenger-side wiper blades. The arm uses a Side Pin (1/4") connector.
Do all 1991–1993 Mercury Tracer model years use the same wipers?
Yes. Every Mercury Tracer from 1991 to 1993 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.
What connector does the Mercury Tracer wiper arm use?
Side Pin (1/4"). Most replacement blades include an adapter for it, so check the adapter chart in the package.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.