WiperFinder

1986–1989 Nissan 300ZX Wiper Blade Sizes

Model years 1986 to 1989 Sizes confirmed by 2 sources

Your wiper sizes

Driver 19in 480 mm
Passenger 19in 480 mm
J-Hook (9×3 mm) connector

Every Nissan 300ZX from 1986 to 1989 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Nissan 300ZX

Shop the 19" + 19" pair on Amazon
Driver 19" only Passenger 19" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1986–1989 Nissan 300ZX

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 19" + 19"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 19" + 19"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 19" + 19"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 1986–1989 Nissan 300ZX sits

Wiper sizes for every Nissan 300ZX range in our data.

1990–1996
Driver
21"
Passenger
21"
1986–1989
Driver
19"
Passenger
19"
YearDriverPassengerArm
1996 21" 21" J-Hook (9×3 mm)
1995 21" 21" J-Hook (9×3 mm)
1994 21" 21" J-Hook (9×3 mm)
1993 21" 21" J-Hook (9×3 mm)
1992 21" 21" J-Hook (9×3 mm)
1991 21" 21" J-Hook (9×3 mm)
1990 21" 21" J-Hook (9×3 mm)
1989 19" 19" J-Hook (9×3 mm) This page
1988 19" 19" J-Hook (9×3 mm) This page
1987 19" 19" J-Hook (9×3 mm) This page
1986 19" 19" J-Hook (9×3 mm) This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 19".

About this data

Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

1986–1989 Nissan 300ZX wiper FAQ

Quick answers about this car.

What size wipers fit a 1986–1989 Nissan 300ZX?

The 1986–1989 Nissan 300ZX takes 19" driver-side and 19" passenger-side wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 1986–1989 Nissan 300ZX model years use the same wipers?

Yes. Every Nissan 300ZX from 1986 to 1989 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Nissan 300ZX wiper arm use?

J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes