WiperFinder

2011–2018 Nissan GT-R Wiper Blade Sizes

Model years 2011 to 2018 Sizes from one source so far

Your wiper sizes

Driver 22in 550 mm
Passenger 19in 480 mm
J-Hook (9×4 mm) connector

Every Nissan GT-R from 2011 to 2018 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Nissan GT-R

Shop the 22" + 19" pair on Amazon

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 2011–2018 Nissan GT-R

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 22" + 19"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 22" + 19"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 22" + 19"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Where the 2011–2018 Nissan GT-R sits

Wiper sizes for every Nissan GT-R range in our data.

Wiper blade sizes by model year for the Nissan GT-R, around 2011–2018
YearDriverPassengerArmPage
2019 21" 21" J-Hook (9×3 mm)
2018 22" 19" J-Hook (9×4 mm) This page
2017 22" 19" J-Hook (9×4 mm) This page
2016 22" 19" J-Hook (9×4 mm) This page
2015 22" 19" J-Hook (9×4 mm) This page
2014 22" 19" J-Hook (9×4 mm) This page
2013 22" 19" J-Hook (9×4 mm) This page
2012 22" 19" J-Hook (9×4 mm) This page
2011 22" 19" J-Hook (9×4 mm) This page
2010 21" 19" J-Hook (9×4 mm)
2009 21" 19" J-Hook (9×4 mm)

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 22" + 19".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

2011–2018 Nissan GT-R wiper FAQ

Quick answers about this car.

What size wipers fit a 2011–2018 Nissan GT-R?

The 2011–2018 Nissan GT-R takes 22" driver-side and 19" passenger-side wiper blades. The arm uses a J-Hook (9×4 mm) connector.

Do all 2011–2018 Nissan GT-R model years use the same wipers?

Yes. Every Nissan GT-R from 2011 to 2018 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Nissan GT-R wiper arm use?

J-Hook (9×4 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes