WiperFinder

1961–1966 Oldsmobile Starfire Wiper Blade Sizes

Model years 1961 to 1966 Sizes from one source so far

Your wiper sizes

Driver 18in 450 mm
Passenger 18in 450 mm
J-Hook (9×3 mm) connector

Every Oldsmobile Starfire from 1961 to 1966 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Oldsmobile Starfire

Shop the 18" + 18" pair on Amazon
Driver 18" only Passenger 18" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1961–1966 Oldsmobile Starfire

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 18" + 18"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 18" + 18"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 18" + 18"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 1961–1966 Oldsmobile Starfire sits

Wiper sizes for every Oldsmobile Starfire range in our data.

1975–1980
Driver
16"
Passenger
16"
1961–1966
Driver
18"
Passenger
18"
YearDriverPassengerArm
1980 16" 16" Bayonet
1979 16" 16" Bayonet
1978 16" 16" Bayonet
1977 16" 16" Bayonet
1976 16" 16" Bayonet
1975 16" 16" Bayonet
1966 18" 18" J-Hook (9×3 mm) This page
1965 18" 18" J-Hook (9×3 mm) This page
1964 18" 18" J-Hook (9×3 mm) This page
1963 18" 18" J-Hook (9×3 mm) This page
1962 18" 18" J-Hook (9×3 mm) This page
1961 18" 18" J-Hook (9×3 mm) This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 18".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

1961–1966 Oldsmobile Starfire wiper FAQ

Quick answers about this car.

What size wipers fit a 1961–1966 Oldsmobile Starfire?

The 1961–1966 Oldsmobile Starfire takes 18" driver-side and 18" passenger-side wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 1961–1966 Oldsmobile Starfire model years use the same wipers?

Yes. Every Oldsmobile Starfire from 1961 to 1966 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Oldsmobile Starfire wiper arm use?

J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes