Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 17" + 17"
Check price on Amazon1972–1978 Peterbilt 200 Wiper Blade Sizes
Your wiper sizes
Driver
17in
430 mm
Passenger
17in
430 mm
Every Peterbilt 200 from 1972 to 1978 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Peterbilt 200
Shop the 17" + 17" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1972–1978 Peterbilt 200
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 17" + 17"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 17" + 17"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Beam blade
Bosch ICON
Beam blade
TRICO Ice
Conventional blade
Rain-X Weatherbeater
No photo yet
Type not stated
PIAA Super Silicone
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Compare these blades
All comparisons-
vsNo photo yet
Bosch ICON vs PIAA Super Silicone
14 owner posts name both
-
vs
Bosch ICON vs Rain-X Weatherbeater
8 owner posts name both
-
vs
Bosch ICON vs TRICO Ice
4 owner posts name both
-
vs
Bosch ICON vs Rain-X Latitude
48 owner posts name both
-
vs
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
-
vs
Bosch ICON vs Bosch FOCUS
16 owner posts name both
Where the 1972–1978 Peterbilt 200 sits
Wiper sizes for every Peterbilt 200 range in our data.
1993–2000
- Driver
- 18"
- Passenger
- 18"
1972–1978
- Driver
- 17"
- Passenger
- 17"
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 2000 | 18" | 18" | J-Hook (9×4 mm) | |
| 1999 | 18" | 18" | J-Hook (9×4 mm) | |
| 1998 | 18" | 18" | J-Hook (9×4 mm) | |
| 1997 | 18" | 18" | J-Hook (9×4 mm) | |
| 1996 | 18" | 18" | J-Hook (9×4 mm) | |
| 1995 | 18" | 18" | J-Hook (9×4 mm) | |
| 1994 | 18" | 18" | J-Hook (9×4 mm) | |
| 1993 | 18" | 18" | J-Hook (9×4 mm) | |
| 1978 | 17" | 17" | — Not in our data | This page |
| 1977 | 17" | 17" | — Not in our data | This page |
| 1976 | 17" | 17" | — Not in our data | This page |
| 1975 | 17" | 17" | — Not in our data | This page |
| 1974 | 17" | 17" | — Not in our data | This page |
| 1973 | 17" | 17" | — Not in our data | This page |
| 1972 | 17" | 17" | — Not in our data | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 17".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1972–1978 Peterbilt 200 wiper FAQ
Quick answers about this car.
What size wipers fit a 1972–1978 Peterbilt 200?
The 1972–1978 Peterbilt 200 takes 17" driver-side and 17" passenger-side wiper blades.
Do all 1972–1978 Peterbilt 200 model years use the same wipers?
Yes. Every Peterbilt 200 from 1972 to 1978 shares the same blade lengths. If a blade fits one of these years, it fits them all.
What connector does the Peterbilt 200 wiper arm use?
We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.