Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 10"
Check price on Amazon1959–1965 Rolls-Royce Phantom Wiper Blade Sizes
Your wiper sizes
Driver
Not in our data yet
Passenger
10in
250 mm
Every Rolls-Royce Phantom from 1959 to 1965 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Rolls-Royce Phantom
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1959–1965 Rolls-Royce Phantom
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 10"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 10"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Conventional blade
Bosch MicroEdge
Conventional blade
ANCO 31-Series
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Where the 1959–1965 Rolls-Royce Phantom sits
Wiper sizes for every Rolls-Royce Phantom range in our data.
2021–2023
- Driver
- 26"
- Passenger
- 26"
- Driver
- 26"
- Passenger
- 17"
- Driver
- 26"
- Passenger
- 26"
- Driver
- 24"
- Passenger
- 24"
- Driver
- 14"
- Passenger
- 14"
1959–1965
- Passenger
- 10"
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1970 | 14" | 14" | — Not in our data | |
| 1969 | 14" | 14" | — Not in our data | |
| 1968 | 14" | 14" | — Not in our data | |
| 1967 | 14" | 14" | — Not in our data | |
| 1966 | 14" | 14" | — Not in our data | |
| 1965 | — Not in our data | 10" | — Not in our data | This page |
| 1964 | — Not in our data | 10" | — Not in our data | This page |
| 1963 | — Not in our data | 10" | — Not in our data | This page |
| 1962 | — Not in our data | 10" | — Not in our data | This page |
| 1961 | — Not in our data | 10" | — Not in our data | This page |
| 1960 | — Not in our data | 10" | — Not in our data | This page |
| 1959 | — Not in our data | 10" | — Not in our data | This page |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 10".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1959–1965 Rolls-Royce Phantom wiper FAQ
Quick answers about this car.
What size wipers fit a 1959–1965 Rolls-Royce Phantom?
Our data for the 1959–1965 Rolls-Royce Phantom lists 10" passenger-side only. Driver size not in our data.
Do all 1959–1965 Rolls-Royce Phantom model years use the same wipers?
Yes. Every Rolls-Royce Phantom from 1959 to 1965 shares the same blade lengths. If a blade fits one of these years, it fits them all.
What connector does the Rolls-Royce Phantom wiper arm use?
We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.