WiperFinder

1987–1988 Toyota Corolla Wiper Blade Sizes

Model years 1987 to 1988 Sizes from one source so far

Your wiper sizes

Driver 20in 500 mm
Passenger 18in 450 mm
Bayonet connector

Every Toyota Corolla from 1987 to 1988 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Corolla

Shop the 20" + 18" pair on Amazon
Driver 20" only Passenger 18" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1987–1988 Toyota Corolla

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 20" + 18"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 20" + 18"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 20" + 18"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 1987–1988 Toyota Corolla sits

Wiper sizes for every Toyota Corolla range in our data.

2026
Driver
28"
Passenger
14"
 2023–2025
Driver
28"
Passenger
14"
Rear
12"
 2022
Driver
26"
Passenger
14"
 2020–2021
Driver
28"
Passenger
14"
 2019
Driver
26"
Passenger
16"
 2009–2018
Driver
26"
Passenger
16"
 2002–2008
Driver
24"
Passenger
18"
 1989–2001
Driver
20"
Passenger
18"
1987–1988
Driver
20"
Passenger
18"
1984–1986
Driver
19"
Passenger
17"
 1978–1983
Driver
17"
Passenger
17"
 1977
Driver
14"
Passenger
14"
YearDriverPassengerArm
2001 20" 18" J-Hook (9×3 mm)
2000 20" 18" J-Hook (9×3 mm)
1999 20" 18" J-Hook (9×3 mm)
1998 20" 18" J-Hook (9×3 mm)
1997 20" 18" J-Hook (9×3 mm)
1996 20" 18" J-Hook (9×3 mm)
1995 20" 18" J-Hook (9×3 mm)
1994 20" 18" J-Hook (9×3 mm)
1993 20" 18" J-Hook (9×3 mm)
1992 20" 18" J-Hook (9×3 mm)
1991 20" 18" J-Hook (9×3 mm)
1990 20" 18" J-Hook (9×3 mm)
1989 20" 18" J-Hook (9×3 mm)
1988 20" 18" Bayonet This page
1987 20" 18" Bayonet This page
1986 19" 17" J-Hook (9×3 mm)
1985 19" 17" J-Hook (9×3 mm)
1984 19" 17" J-Hook (9×3 mm)

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 20" + 18".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.

1987–1988 Toyota Corolla wiper FAQ

Quick answers about this car.

What size wipers fit a 1987–1988 Toyota Corolla?

The 1987–1988 Toyota Corolla takes 20" driver-side and 18" passenger-side wiper blades. The arm uses a Bayonet connector.

Do all 1987–1988 Toyota Corolla model years use the same wipers?

Yes. Every Toyota Corolla from 1987 to 1988 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Toyota Corolla wiper arm use?

Bayonet. Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes