WiperFinder

1985–1986 Toyota Cressida Wiper Blade Sizes

Model years 1985 to 1986 Sizes from one source so far

Your wiper sizes

Driver 19in 480 mm
Passenger 19in 480 mm
Rear 14in 350 mm

Every Toyota Cressida from 1985 to 1986 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Cressida

Shop the 19" + 19" pair on Amazon
Driver 19" only Passenger 19" only Rear 14" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1985–1986 Toyota Cressida

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 19" + 19"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 19" + 19"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 19" + 19"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 1985–1986 Toyota Cressida sits

Wiper sizes for every Toyota Cressida range in our data.

1987–1992
Driver
19"
Passenger
17"
1985–1986
Driver
19"
Passenger
19"
Rear
14"
1980–1984
Driver
17"
Passenger
17"
 1978–1979
Driver
16"
Passenger
16"
YearDriverPassengerRearArm
1992 19" 17" — Not confirmed
1991 19" 17" — Not confirmed
1990 19" 17" — Not confirmed
1989 19" 17" — Not confirmed
1988 19" 17" — Not confirmed
1987 19" 17" — Not confirmed
1986 19" 19" 14" — This page
1985 19" 19" 14" — This page
1984 17" 17" — J-Hook (9×3 mm)
1983 17" 17" — J-Hook (9×3 mm)
1982 17" 17" — J-Hook (9×3 mm)
1981 17" 17" — J-Hook (9×3 mm)
1980 17" 17" — J-Hook (9×3 mm)

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 19".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.

1985–1986 Toyota Cressida wiper FAQ

Quick answers about this car.

What size wipers fit a 1985–1986 Toyota Cressida?

The 1985–1986 Toyota Cressida takes 19" driver-side, 19" passenger-side and 14" rear wiper blades.

Do all 1985–1986 Toyota Cressida model years use the same wipers?

Yes. Every Toyota Cressida from 1985 to 1986 shares the same blade lengths. If a blade fits one of these years, it fits them all.

What connector does the Toyota Cressida wiper arm use?

We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes