WiperFinder

2025–2026 Toyota Crown Signia Wiper Blade Sizes

Model years 2025 to 2026 Sizes from one source so far

Your wiper sizes

Driver 26in 650 mm
Passenger 18in 450 mm
Rear 12in 300 mm
Arm type not confirmed

Every Toyota Crown Signia from 2025 to 2026 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Crown Signia

Shop the 26" + 18" pair on Amazon
Driver 26" only Passenger 18" only Rear 12" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 2025–2026 Toyota Crown Signia

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 26" + 18"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 26" + 18"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 26" + 18"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Model years covered

YearDriverPassengerRearArm
2026 26" 18" 12" J-Hook (9×3 mm) / Not confirmed This page
2025 26" 18" 12" J-Hook (9×3 mm) / Not confirmed This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 26" + 18".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

We haven't confirmed the arm type for this car yet, so we don't give fitting steps. The adapter chart inside the blade's box shows which adapter to use.

2025–2026 Toyota Crown Signia wiper FAQ

Quick answers about this car.

What size wipers fit a 2025–2026 Toyota Crown Signia?

The 2025–2026 Toyota Crown Signia takes 26" driver-side, 18" passenger-side and 12" rear wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 2025–2026 Toyota Crown Signia model years use the same wipers?

Yes. Every Toyota Crown Signia from 2025 to 2026 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Toyota Crown Signia wiper arm use?

We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes