WiperFinder

2008–2010 Toyota Highlander Wiper Blade Sizes

Model years 2008 to 2010 Sizes from one source so far

Your wiper sizes

Driver 26in 650 mm
Passenger 20in 500 mm
Rear 12in 300 mm
Arm type not confirmed

Every Toyota Highlander from 2008 to 2010 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Highlander

Shop the 26" + 20" pair on Amazon
Driver 26" only Passenger 20" only Rear 12" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 2008–2010 Toyota Highlander

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 26" + 20"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 26" + 20"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 26" + 20"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 2008–2010 Toyota Highlander sits

Wiper sizes for every Toyota Highlander range in our data.

2025
Driver
26"
Passenger
18"
Rear
10"
 2023–2024
Driver
26"
Passenger
18"
Rear
10"
 2020–2021
Driver
24"
Passenger
18"
 2011–2019
Driver
26"
Passenger
20"
2008–2010
Driver
26"
Passenger
20"
Rear
12"
2001–2007
Driver
22"
Passenger
19"
YearDriverPassengerRearArm
2019 26" 20" — J-Hook (9×3 mm)
2018 26" 20" — J-Hook (9×3 mm)
2017 26" 20" — J-Hook (9×3 mm)
2016 26" 20" — J-Hook (9×3 mm)
2015 26" 20" — J-Hook (9×3 mm)
2014 26" 20" — J-Hook (9×3 mm)
2013 26" 20" — J-Hook (9×3 mm)
2012 26" 20" — J-Hook (9×3 mm)
2011 26" 20" — J-Hook (9×3 mm)
2010 26" 20" 12" J-Hook (9×3 mm) / Not confirmed This page
2009 26" 20" 12" J-Hook (9×3 mm) / Not confirmed This page
2008 26" 20" 12" J-Hook (9×3 mm) / Not confirmed This page
2007 22" 19" — J-Hook (9×3 mm)
2006 22" 19" — J-Hook (9×3 mm)
2005 22" 19" — J-Hook (9×3 mm)
2004 22" 19" — J-Hook (9×3 mm)
2003 22" 19" — J-Hook (9×3 mm)
2002 22" 19" — J-Hook (9×3 mm)
2001 22" 19" — J-Hook (9×3 mm)

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 26" + 20".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

We haven't confirmed the arm type for this car yet, so we don't give fitting steps. The adapter chart inside the blade's box shows which adapter to use.

2008–2010 Toyota Highlander wiper FAQ

Quick answers about this car.

What size wipers fit a 2008–2010 Toyota Highlander?

The 2008–2010 Toyota Highlander takes 26" driver-side, 20" passenger-side and 12" rear wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 2008–2010 Toyota Highlander model years use the same wipers?

Yes. Every Toyota Highlander from 2008 to 2010 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Toyota Highlander wiper arm use?

We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes