WiperFinder

1983–1997 Toyota Land Cruiser Wiper Blade Sizes

Model years 1983 to 1997 Sizes confirmed by 2 sources

Your wiper sizes

Driver 18in 450 mm
Passenger 18in 450 mm
J-Hook (9×3 mm) connector

Every Toyota Land Cruiser from 1983 to 1997 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Land Cruiser

Shop the 18" + 18" pair on Amazon

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1983–1997 Toyota Land Cruiser

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 18" + 18"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 18" + 18"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 18" + 18"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Where the 1983–1997 Toyota Land Cruiser sits

Wiper sizes for every Toyota Land Cruiser range in our data.

Wiper blade sizes by model year for the Toyota Land Cruiser, around 1983–1997
YearDriverPassengerArmPage
1998 20" 20" J-Hook (9×3 mm)
1997 18" 18" J-Hook (9×3 mm) This page
1996 18" 18" J-Hook (9×3 mm) This page
1995 18" 18" J-Hook (9×3 mm) This page
1994 18" 18" J-Hook (9×3 mm) This page
1993 18" 18" J-Hook (9×3 mm) This page
1992 18" 18" J-Hook (9×3 mm) This page
1991 18" 18" J-Hook (9×3 mm) This page
1990 18" 18" J-Hook (9×3 mm) This page
1989 18" 18" J-Hook (9×3 mm) This page
1988 18" 18" J-Hook (9×3 mm) This page
1987 18" 18" J-Hook (9×3 mm) This page
1986 18" 18" J-Hook (9×3 mm) This page
1985 18" 18" J-Hook (9×3 mm) This page
1984 18" 18" J-Hook (9×3 mm) This page
1983 18" 18" J-Hook (9×3 mm) This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 18".

About this data

Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

1983–1997 Toyota Land Cruiser wiper FAQ

Quick answers about this car.

What size wipers fit a 1983–1997 Toyota Land Cruiser?

The 1983–1997 Toyota Land Cruiser takes 18" driver-side and 18" passenger-side wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 1983–1997 Toyota Land Cruiser model years use the same wipers?

Yes. Every Toyota Land Cruiser from 1983 to 1997 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Toyota Land Cruiser wiper arm use?

J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes