WiperFinder

1983–1986 Toyota Tercel Wiper Blade Sizes

Model years 1983 to 1986 Sizes confirmed by 2 sources

Your wiper sizes

Driver 19in 480 mm
Passenger 18in 450 mm
J-Hook (9×3 mm) connector

Every Toyota Tercel from 1983 to 1986 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Toyota Tercel

Shop the 19" + 18" pair on Amazon
Driver 19" only Passenger 18" only

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1983–1986 Toyota Tercel

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 19" + 18"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 19" + 18"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 19" + 18"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Compare these blades

All comparisons

Where the 1983–1986 Toyota Tercel sits

Wiper sizes for every Toyota Tercel range in our data.

1987–1999
Driver
18"
Passenger
18"
1983–1986
Driver
19"
Passenger
18"
1980–1982
Driver
14"
Passenger
14"
YearDriverPassengerArm
1999 18" 18" J-Hook (9×3 mm)
1998 18" 18" J-Hook (9×3 mm)
1997 18" 18" J-Hook (9×3 mm)
1996 18" 18" J-Hook (9×3 mm)
1995 18" 18" J-Hook (9×3 mm)
1994 18" 18" J-Hook (9×3 mm)
1993 18" 18" J-Hook (9×3 mm)
1992 18" 18" J-Hook (9×3 mm)
1991 18" 18" J-Hook (9×3 mm)
1990 18" 18" J-Hook (9×3 mm)
1989 18" 18" J-Hook (9×3 mm)
1988 18" 18" J-Hook (9×3 mm)
1987 18" 18" J-Hook (9×3 mm)
1986 19" 18" J-Hook (9×3 mm) This page
1985 19" 18" J-Hook (9×3 mm) This page
1984 19" 18" J-Hook (9×3 mm) This page
1983 19" 18" J-Hook (9×3 mm) This page
1982 14" 14" J-Hook (9×3 mm)
1981 14" 14" J-Hook (9×3 mm)
1980 14" 14" J-Hook (9×3 mm)

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 19" + 18".

About this data

Fit data confirmed by 2 independent sources. Model years that share identical blades are grouped on one page.

How to fit your new blades

  1. Lift the arm

    Pull the wiper arm away from the glass until it stays up. Put a towel on the windshield in case the arm snaps back.

  2. Release the old blade

    Press the tab where the blade connects to the hook, then slide the blade down and off the arm.

  3. Clip on the new blade

    Slide the new blade's adapter up into the hook until it clicks. Most blades ship with a J-hook adapter already fitted.

  4. Lower the arm and test

    Gently rest the arm back against the glass. Spray your washer fluid once to check for clean wipes without streaks or chatter.

1983–1986 Toyota Tercel wiper FAQ

Quick answers about this car.

What size wipers fit a 1983–1986 Toyota Tercel?

The 1983–1986 Toyota Tercel takes 19" driver-side and 18" passenger-side wiper blades. The arm uses a J-Hook (9×3 mm) connector.

Do all 1983–1986 Toyota Tercel model years use the same wipers?

Yes. Every Toyota Tercel from 1983 to 1986 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Toyota Tercel wiper arm use?

J-Hook (9×3 mm). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes