WiperFinder

1970–1974 Plymouth Barracuda Wiper Blade Sizes

Model years 1970 to 1974 Sizes from one source so far

Your wiper sizes

Driver 16in 400 mm
Passenger 16in 400 mm
Side Pin (3/16") connector

Every Plymouth Barracuda from 1970 to 1974 takes these sizes. Any year in this range uses the same wiper blades.

Blades for your Plymouth Barracuda

Shop the 16" + 16" pair on Amazon

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Best wiper blades for the 1970–1974 Plymouth Barracuda

Three blade types, each in your sizes.

Budget

Conventional blades

  • Metal frame, the classic design
  • Lowest cost, fine on flatter glass

In your sizes: 16" + 16"

Check price on Amazon
Our pick

Beam blades

  • One piece with no frame to ice up
  • Hugs curved modern windshields

In your sizes: 16" + 16"

Check price on Amazon
Aero

Hybrid blades

  • A frame under an aero shell
  • Even pressure with a sleek profile

In your sizes: 16" + 16"

Check price on Amazon

Blades in your sizes

Each button opens that blade in your length.

As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.

Model years covered

Wiper blade sizes by model year for the Plymouth Barracuda, around 1970–1974
YearDriverPassengerArmPage
1974 16" 16" Side Pin (3/16") This page
1973 16" 16" Side Pin (3/16") This page
1972 16" 16" Side Pin (3/16") This page
1971 16" 16" Side Pin (3/16") This page
1970 16" 16" Side Pin (3/16") This page

Good to know

Check against your old blades

Measure the rubber strip from end to end. It should match 16".

About this data

Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.

How to fit your new blades

Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.

1970–1974 Plymouth Barracuda wiper FAQ

Quick answers about this car.

What size wipers fit a 1970–1974 Plymouth Barracuda?

The 1970–1974 Plymouth Barracuda takes 16" driver-side and 16" passenger-side wiper blades. The arm uses a Side Pin (3/16") connector.

Do all 1970–1974 Plymouth Barracuda model years use the same wipers?

Yes. Every Plymouth Barracuda from 1970 to 1974 shares the same blade lengths and arm type. If a blade fits one of these years, it fits them all.

What connector does the Plymouth Barracuda wiper arm use?

Side Pin (3/16"). Most replacement blades include an adapter for it, so check the adapter chart in the package.

Can I use a wiper blade one size longer or shorter?

Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.

How often should I replace my wiper blades?

Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.

Different car?

Look up the wiper sizes for any car in our data.

All makes