Conventional blades
- Metal frame, the classic design
- Lowest cost, fine on flatter glass
In your sizes: 15" + 15"
Check price on Amazon1967–1969 Plymouth Barracuda Wiper Blade Sizes
Your wiper sizes
Driver
15in
380 mm
Passenger
15in
380 mm
Every Plymouth Barracuda from 1967 to 1969 takes these sizes. Any year in this range uses the same wiper blades.
Blades for your Plymouth Barracuda
Shop the 15" + 15" pair on AmazonAs an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Best wiper blades for the 1967–1969 Plymouth Barracuda
Three blade types, each in your sizes.
Beam blades
- One piece with no frame to ice up
- Hugs curved modern windshields
In your sizes: 15" + 15"
Check price on AmazonHybrid blades
- A frame under an aero shell
- Even pressure with a sleek profile
In your sizes: 15" + 15"
Check price on AmazonBlades in your sizes
Each button opens that blade in your length.
Beam blade
Bosch ICON
Beam blade
TRICO Ice
Conventional blade
Rain-X Weatherbeater
No photo yet
Type not stated
PIAA Super Silicone
As an Amazon Associate we earn from qualifying purchases. This never changes the wiper sizes we show.
Compare these blades
All comparisons-
vsNo photo yet
Bosch ICON vs PIAA Super Silicone
14 owner posts name both
-
vs
Bosch ICON vs Rain-X Weatherbeater
8 owner posts name both
-
vs
Bosch ICON vs TRICO Ice
4 owner posts name both
-
vs
Bosch ICON vs Rain-X Latitude
48 owner posts name both
-
vs
Bosch ICON vs Bosch MicroEdge
17 owner posts name both
-
vs
Bosch ICON vs Bosch FOCUS
16 owner posts name both
Where the 1967–1969 Plymouth Barracuda sits
Wiper sizes for every Plymouth Barracuda range in our data.
| Year | Driver | Passenger | Arm | Page |
|---|---|---|---|---|
| 1974 | 16" | 16" | Side Pin (3/16") | |
| 1973 | 16" | 16" | Side Pin (3/16") | |
| 1972 | 16" | 16" | Side Pin (3/16") | |
| 1971 | 16" | 16" | Side Pin (3/16") | |
| 1970 | 16" | 16" | Side Pin (3/16") | |
| 1969 | 15" | 15" | — Not in our data | This page |
| 1968 | 15" | 15" | — Not in our data | This page |
| 1967 | 15" | 15" | — Not in our data | This page |
| 1966 | 13" | 13" | — Not in our data | |
| 1965 | 13" | 13" | — Not in our data | |
| 1964 | 13" | 13" | — Not in our data |
Good to know
Check against your old blades
Measure the rubber strip from end to end. It should match 15".
About this data
Fit data comes from one source so far; we're cross-checking every size against more sources. Consecutive model years with identical blades share one page.
How to fit your new blades
Step-by-step fitting for this arm type is on its way. The adapter chart inside the blade's box shows which adapter to use.
1967–1969 Plymouth Barracuda wiper FAQ
Quick answers about this car.
What size wipers fit a 1967–1969 Plymouth Barracuda?
The 1967–1969 Plymouth Barracuda takes 15" driver-side and 15" passenger-side wiper blades.
Do all 1967–1969 Plymouth Barracuda model years use the same wipers?
Yes. Every Plymouth Barracuda from 1967 to 1969 shares the same blade lengths. If a blade fits one of these years, it fits them all.
What connector does the Plymouth Barracuda wiper arm use?
We haven't confirmed the arm type for this car yet. The adapter chart in the blade's box shows which adapter to use.
Can I use a wiper blade one size longer or shorter?
Stick with the listed sizes. A longer blade can hit the windshield frame or the other blade, while a shorter one leaves an unwiped gap. If your old blades don’t match our sizes, measure them end to end.
How often should I replace my wiper blades?
Most drivers change them every 6 to 12 months. Swap them sooner if they start to streak, chatter, or miss spots.